Women's hat with a flower, crochet. Knitted flowers Crochet hats with beautiful flowers

Crochet and knitted items are at the peak of popularity right now. Crochet flowers for adult and children's clothing and hats look especially interesting. We invite you to try knitting beautiful bright flowers. Our master class is simple and clear, with step-by-step descriptions and diagrams. Crochet flowers for decoration can be crocheted from completely different threads: cotton, wool, synthetic, silk, mixed and darning. The main thing is that they are tightly twisted and do not fall apart into thin threads.

The most popular crocheted flower is, of course, the rose. Knitted roses are often used to decorate children's and adults' hats, cardigans, bags, headbands, and so on. We offer you the simplest master class, which is suitable for beginners in crocheting. The center of the rose can be decorated with a bead or button, which is very popular now.

To work you will need:

1. Threads of medium thickness.
2. Hook number 2.
3. Scissors.
4. The needle is big.

Cast on an even number of loops. For example, if you crochet xxx50 loops, the rose will be 7-7.5 cm in size. The number of loops determines what size rose you want to get. In our master class we cast on 26 loops, we will make a small rose. First row - knit sc (single crochet).

Second row: we knit 2 VP (chain loops) for lifting, in the 2nd loop we make RLS + 2 VP.

Third row: in the 1st loop of the second row we knit 5 dcs (dc).

Do the same in the next loop: knit 5 dcs.

In this way we knit the entire row to the end.

A spiral has formed, which needs to be twisted into a column and stitched with a needle so that it does not fall apart.

In order to make a leaf, you need to knit a chain of 8 loops.

Second row: 2 sc (single crochet), 3 dc, 2 sc.

We continue until the end.

At the end of the work we knit a picot.

These beautiful crocheted flowers are easy to knit in one evening. The combination of colors in this master class depends on your imagination, because pansies can be amazing colors.

We will knit according to this pattern:

Let's get started: make a sliding loop. We put 5 sc into it.

Next we knit like this: 1 RLS (lifting chain loop), 2 RLS in the RLS of the first row, 6 VP, 2 RLS in the second RLS of the previous row, 6 VP, 2 RLS in the third RLS of the previous row, 6 VP, 2 RLS in the fourth RLS of the previous row , 6 VP, 2 RLS in the fifth RLS of the previous row.

Under 6 VP we knit 1 SS (connecting stitch), 1SC, 1 PS (half-dc), 1DC (double crochet), 10 CC2H (double crochet), 1 DC, 1 DC, 1 PS, 1 SC. Under the next six VPs we knit 1 sc, 1 dc, 10 dc2n, 1 dc, 1 pc, 1 sc.

Under the third 6 VP we will knit 1 sc, 1 pc, 8 sc, 1 pc, 1 sc. Under the fourth 6 VP we knit 1 sc, 1 sc, 8 sc, 1 sc, 1 sc. Under the fifth 6 VP we knit 1 sc, 1 sc, 8 dc, 1 sc, 1 sc.

We tie two large petals on top with contrasting threads.

These cool flowers can be crocheted to decorate clothes, stripes on your head, and so on. This lotus will make an excellent decor. You can choose melange yarn with a small print; it will look very beautiful in this product.

This flower needs to be crocheted gradually, in several steps. First, three sheets are knitted. In order to knit a sheet, you need to cast a chain of 5 VPs and close it into a ring. Next, you need to tie the chain with sc (single crochets). Then knit the leaves according to the pattern.

Next, let's move on to the petals. Let's start the lower petals with a set of 10 VPs. We tie the loops with double crochets and look at the diagram. At the end you need to tie the leaves with sc, and then tie with concave sc, as in the diagram.

We knit the top flowers carefully, otherwise the product may warp and it will not be symmetrical. For the top flowers, you need to cast a chain of 8 VPs and tie them with double crochets (dc), as can be seen in the diagram. When all parts of the flower are ready, they must be sewn together with the same threads.

We knit 3 lifting stitches and 13 double crochet stitches into the amigurumi ring.

Then we close it into a ring, fastening it with a connecting loop - we get a circle.


Next, we continue knitting according to the proposed pattern below:
1r. - pr x 14 times = 28 p
2 rub. – treble double crochet, double crochet x 14 times = 42 sts
3 rub. – 2 double crochets, row x 14 times = 56 sts
4r. - 3 double crochets, row x 14 times = 70 sts
5 rub. - 4 double crochets, row x 14 times = 84 sts
6r. - 5 double crochets, row x 14 times = 98 sts
7r. - 6 double crochets, row x 14 times = 112 sts


The base for the women's hat is ready, the next 15 rows, i.e. From rows 8 to 22 we knit a double crochet stitch. We get a hat.


The last stage is knitting an elastic band. To do this, continue knitting with single crochets behind the back wall.

As a result of this knitting we get such an interesting elastic band.


To make our hat look more elegant, beautiful and original on your head, we will crochet a chic flower for it using the same color of yarn.

Crocheted flower for a hat - step by step with photo:

So let's get started...
In the first row we need to knit a chain of 52 chain stitches.


In the second row we cast on three instep stitches, and knit one double crochet stitch into the base loop, *skip one loop of the bottom row and into the next stitch we knit a double crochet stitch, chain stitch, double crochet stitch*. Repeat the action from * to *.


Third row. We unfold the knitting and knit three lifting loops. Next, in each tick of the previous row, namely under one chain stitch, we knit 2 double crochets, 3 double crochets, 2 double crochets. Repeat this action until the end of the row.


There is only one last row left that we need to knit. To do this, unroll the knitting, knit three lifting stitches, knit 9 double crochet stitches into the first arch, then knit 10 double crochet stitches into each arch. The base for the flower is ready.


We collect the flower by twisting it in a spiral, starting from the center. We will use a tapestry needle and sew the flower between the rows in a circle so that it does not fall apart.


Sew a mother-of-pearl bead in the center of the flower.


We sew the flower itself to the hat.

Spring is just around the corner! We have a wonderful master class, thanks to which you will learn how to crochet voluminous flowers. You can use them to make a bright pillow case or a wonderful blanket.

Follow the instructions in the video master class:

I have collected in this article the simplest and most understandable lessons for crocheting flowers. Here you will find a method for knitting narrow petals and flower patterns with oval petals, as well as how to knit a voluminous flower with multi-layered petals and much more. I address this article not only to advanced masters, but also to beginners in this matter.

Crochet flowers

Crocheted flowers can be both small and large. With their help you can decorate absolutely any thing. You can decorate not only a napkin with flowers, but also a curtain tieback, a bag, a hat, a scarf or mittens. With the help of knitted flowers you can add additional beauty to your hairstyle and make beautiful cards with your children. In a word, use your imagination and create great things!

These wonderful crocheted appliques will be an excellent decoration for both things and the interior. The article contains diagrams of three flowers: dandelion, tulip and tropical flower. All flowers are crocheted from 100% cotton “Iris” yarn No. 0.9.

Knitted flowers have become very popular. We crochet flowers, then decorate clothes, hats, and use them as keychains for a phone or backpack. Very beautiful bouquets can be created as a gift: flowers as decoration will please any girl or woman!

Crochet flowers

You can decorate a hat, beret, Panama hat, scarf, booties, sweater with a crocheted flower. Can be used as an element of knitted decoration: necklace or hair bands. Even beginners can handle crocheting this flower. Video master classes will help them with this!

Crochet daisy brooch

Using a crochet hook you can knit not only shawls and blouses. This tool helps you create very elegant jewelry like this brooch in the form of a daisy with green leaves.

The work is very elegant because a thin hook and thread are used. This allows you to achieve maximum resemblance to a living flower. This impression is complemented by a half-opened bud that looks like a real one. A brooch in the shape of a daisy looks very elegant and stylish.

In the language of flowers, daisy signifies youth and youth, so this brooch is perfect for young girls and those who are young at heart. Among the Slavic tribes, this flower was considered one of the sacred plants. Chamomile gets its name from the Latin “romana”, which translates as Roman. In the Middle Ages, it was often called “Romanova flower,” and in Greek this word translates as “white flower.” There is a beautiful legend that says that in the place where a star fell a daisy grows. And these flowers themselves are very similar to small white stars.

Save so you don't lose

When creating clothes or accessories with their own hands, every needlewoman thinks about how to decorate them in an original way. A great way is to knit beautiful buds. They will make things attractive and interesting.

Experienced craftswomen can easily cope with this task. But they, like beginners in needlework, will find our tips useful on how to knit a flower: a technique for beginners.

Buds are the decoration of life, they look great on handmade items

Let's start with the simplest thing - a master class on knitting a small openwork flower. To do this, follow the instructions on how to knit a flower with knitting needles for beginners step by step:

1. take a working tool, scissors and yarn, the size of your product depends on its thickness;
2. cast on 35 neat loops;
3. turn the knitting needles and slip on the first stitch, knit off the next five;
4. knit two knit stitches and close again with the next five;
5. repeat the pattern to the end of the entire row until one free loop remains;
6. leave the working thread 15-20cm long and cut it from the ball;
7. pull the thread through the remaining stitches and tighten;
8. firmly tie and secure all the threads on the wrong side;
9. If desired, decorate the middle of the flower with a bead.

• each of the schemes is based on one of the types of loops
• several types can be used in one scheme at once
• the easiest to knit are air stitches and various stitches
• with their help you can make voluminous and flat decorations
• For knitting floral patterns, it is better to use threads of different shades that combine with each other.

How to knit a flower in a square with knitting needles?

Floral elements can decorate any knitted work.

The square frame of plant patterns is well suited as a basis for knitting sweaters and blankets. Let's look at a simple example of how to knit a flower in a square:

1. knit a product consisting of three rows of five petals;
2. form a basic ring and knit ten single crochets into it;
3. then pull it off and secure the end of the thread;
4. you should get seven airy arches forming an inflorescence;
5. move on to the leaves, securing them with the same column without a loop;
6. fasten them on the next arch, retreating two columns from the beginning;
7. cast on a chain of six air stitches for each subsequent leaf;
8. in total you should get ten leaf rays;
9. secure each new sheet with four posts on the arch;
10. the resulting workpiece must be tied with a square;
11. attach a thread of a different color between the sheets;
12. start tying, forming the corners of a square;
13. cast on four air loops in the instep;
14. make a double crochet stitch from the elevation at the base of the sheet;
15. then - a half-column from the second loop from the top, connected to the column at the top of the beam;
16. another column - two yarn overs at the base and two at the beginning of the next sheet;
17. go up its side with two columns without a cap loop and a half-column at the top;
18. tie the four halves of the column together and you get the first corner of the square;
19. follow the same algorithm for the remaining corners;
20. tie the resulting square with two air loops for lifting and half-columns in a circle.

How to knit a voluminous flower with knitting needles?

Many floral products look like real living plants

Volumetric knitted elements serve as a good decoration for clothing and the decor of home slippers and bags. They perfectly complement almost any warm item. A voluminous decoration will look harmonious if you make it together with leaves. To knit a voluminous flower with knitting needles, follow the given pattern:

• make a chain of air loops and connect it with a ring;
• Tie single crochets to the resulting ring;
• for the density of the craft - make three to four times more columns than loops;
• tie the petals based on air stitches;
• connect them with the flower with half-columns;
• tie your product in columns with one slip loop on each.

Using this scheme, you can make completely different products. For greater effect, use multi-colored yarn with different textures and thicknesses.

How to knit a flower onto a hat?

Women's hats for little and adult fashionistas are often decorated with voluminous buds

You can revive or decorate an old headdress using the same knitted floral motif. To knit a flower onto a hat, you will need:

1. cast on the usual 56 stitches and knit approximately 14 rows in stockinette stitch;
2. knit the last back row according to the pattern - one outer loop and four purl stitches, discard one, cast on eight from the wrong side - repeat the action four times;
3. you need to finish the row with four purl stitches and one outer loop;
4. unravel the dropped stitches to the penultimate loop from the beginning of the knitted row;
5. knit the front elements in the outer row and lift the broaches, inserting the knitting needle into the second loop from the edge of the flower;
6. grab the working thread under the broaches and knit the front side;
7. from the reverse row, knit three loops in place of the purl ones;
8. gather all the knitted parts onto one thread and secure it;
9. sew the outer halves of the petal with vertical knitted seams;
10. If desired, insert decorative fittings into the middle of the product.

How to knit a narcissus flower?

Narcissus is one of the most beautiful and beloved flowers

More complex floral designs will require some skill. But there is nothing complicated about how to knit a narcissus flower if you follow this description:

1. use yellow yarn for the inside - cast on 6 chain stitches and close them with a ring using one half-stitch without casting over;
2. first circle - make one air loop and 12 single crochets, close it with half in 1 step;
3. Start each row with three air steps, and on the second round, from each loop, knit two double stitches on the back;
4. third and fourth rows - from each loop, knit one stitch with a throw;
5. fifth round - tie a double crochet, knit two of the same from each 3 loops, there should be 32 of them in total;
6. sixth row - make one half without casting from each stitch, finish with two air loops;
7. take orange yarn for the petals - insert the hook only to the front;
8. start with 1 half single crochet, move from the front wall of one single crochet - two such columns for each step - there should be 24 of them in total;
9. on the second round - make 48 double crochets, two from each stitch;
10. in total there should be 6 rapports according to the given algorithm;
11. To give shape to your daffodil, starch it thoroughly.

How to knit a calla flower with knitting needles?

Callas are flowers for everyone and they are easy to make from threads

Another exotic plant is also very popular among needlewomen. If you want to do it yourself, then this diagram will help you on how to knit a calla flower with knitting needles:

1. take wool yarn of three colors - green (1), white (2) and yellow (3) and distribute it onto 4 knitting needles;
2. stem - tie a cord in three steps with a thread of color 1 approximately 2.5 cm, knit one straight row from it;
3. front side - three steps from the front wall, 9 on each loop;
4. divide the yarn over three knitting needles and continue working in circular rows with thread 2;
5. from the second to the sixth rows - one front one, 3 steps from the face, 3 times 15 loops;
6. knit all 4 rows with circular stitches and fill the space with yarn;
7. the seventh row is also circular, knitted similarly to the first on the front side;
8. tie the white petal in 4 circles and turn it over, continue knitting in straight rows;
9. the first and subsequent purls - with a purl loop;
10. second row from the front row - add one loop at a time - there are 17 in total;
11. the third is similar to the second, the fourth - with one front, 16 times - 33 steps;
12. every even number from the eighth row to the 22nd - the number of loops decreases as follows - 8-25, 10-19, 12-15, 14-11, 16-7, 18-5, 20 -3;
13. last 22nd row - three chain stitches instead of knit stitch, close with stitch;
14. yellow inflorescence - with thread 3, cast on 10 loops and knit one row with knit stitches, slip off the first one, close the rest;
15. collect calla lilies by placing the inflorescence into a petal and sewing them together.

Thread - begonia, hook 2.1. 1 skein was enough.
I'll try to write how I knitted (from memory)
I knitted a strip of fillet mesh around the circumference of my head (4 rows) - in a circle - this is how the bandage turned out
Then I attached the thread and knitted the strip on top with fillet. I tried it on my daughter. The holes were large. I tied them with fans, but at the same time adjusted the pattern so that it did not expand, but vice versa
Fields:
When moving to the brim, I knitted 1 row of sc (I always knit 2-3 rows of sc, but here I didn’t knit it and the hat doesn’t fit so tightly to the head - I did this deliberately so that the hat would be looser at sea)
then 3 rows of arches from 5th century. P.
And then fans according to your favorite pattern
Then I tied a double ring of regilina sc, then in a crawfish step.

Hat “Little Lady”

Diagram of the bottom and crown for exhaust gas 49-50 cm.

My yarn

My connected 13 rows of the bottom:

Up to the 13th row inclusive, we knit the same for all sizes.
* * *
ATTENTION:
When knitting a pattern in those places where we stick the hook into the post, it is advisable to use the “deep” sticking method. The hook must be inserted not under the two upper half-loops of the column, but into the body of the column itself. This method will not allow the pattern to shift when we knit with the crown.
* * *
Starting from the 15th row for all sizes we knit according to the pattern. Repeat rows 15-20 two more times.
They differ from the 15-20th only in the last row. Instead of a dc, I knitted a sc.
We also knit rows 33-38 according to the pattern.
38th row - RLS in each column.
The fields start from the 39th row.

We finish with the CROWN and insert the FIRST regelin equal to the circumference of the head. I made one vein. This is where we complete the work of the RLS. Steam.

We knit the BRIMS of the hat.
In the 39th row we make increases in every 3rd column,
In the 45th row - every 4th, in the 51st - every 5th.
The point is that in each row with increases you need to add 56 CH (7 reports). That is, in the 39th 168/56 =3, in the 45th (168+56)/56=4, etc.

STRENGTHENING FIELDS.

After the last row of fields is knitted, they need to be steamed well.
On a horizontal table surface, the fields should have the shape of a flat circle.

We take the SECOND regilin (TWO veins at once) and tie it with RLS. The length of regilin is not measured in advance!!! They just cut off the excess later.
We straighten the fields well.
Let's steam!
We tie the same row of RLS again. And we tie the last row with a “crawfish step” through the post.
On a plane, the fields should still be shaped like a flat circle.
Once again we steam the fields with an iron through a damp cloth!!!.
To add rigidity, I used SALVITOSE, which is used in felting.
Air dried.

DECORATION.
It must be removable - on a pin or button.

Knitting daisies is very easy.
Dial a chain of 2 v. n. In the first of them, knit 8 half-stitches and close them in a circle in the 1st half-stitch.

When the whole chamomile is ready, tie each of its petals in succession with connecting posts. This will allow them to keep their shape and not curl.

For the centers of the daisies, make small pom-poms using a regular dinner fork.

We wind the thread around the teeth of the fork. Then we tie it with an additional thread in the middle, remove it from the fork and tighten the knot. Then fluff and trim. Sew to the center of the daisy.

Two daisies are small, and one is slightly larger. For it, the scheme is the same, only for the petals we dial not 7, but 9 v. P.

I made a decoration on a button clasp for bags.
We will need a button and a knitted circle - this is what the daisies will be sewn on:

In finished form:

We attach the button to the hat

Scheme (for petals only):

Designations: the sketched dots on the diagram are the loop that is on the hook; the numbers in brackets are the number of loops that we pull from the connected column (to make it easier to count loops)

Blind (connecting) loop

I knit from Soso threads (50g=240m) with a regular hook No. 1.5 (without a handle)

Step by step photo of the process:
1. We knit 6 single crochets into a sliding loop

tighten the thread and close it in a circle.

2. Grabbing only the back half of the loops, we knit 11 single crochets (1 sc in the first half and 2 sc in the subsequent ones), connecting in a circle.

Half loops of a smaller circle will be needed for the upper petals.

3. We knit arches for the lower petals: cast on 5 air loops (c), skip 3 loops of the circle, fasten to the fourth; repeat 2 more times, fasten the last arch into the loop from which the first arch was knitted.

4. We begin to knit the first lower petal: Cast on 4 stitches. p. If you turn the knitting a little, the back (purl) jumpers will be visible

there is one loop on the hook (shaded point in the diagram), we pull out one loop at a time from the purl jumpers (4 sticks), we pull the last one out from under the arch (outermost stick)

there should be 6 loops on the hook

5. Close the row: grab the working thread and knit loops in pairs on the hook (grab the working thread and pull it through 2 loops, grab the working thread and pull it through the next 2 loops). We have the first row (connected column)

6. If you turn the knitting a little, the purl jumpers will be visible,

We knit one in. P.; we pull out the loops from the purl jumpers (1 on the hook + 5 from the jumpers + 1 from under the arch = 7 loops).

We close the row in pairs.

7. Next, we begin to cut the loops. In the sixth row, we begin knitting from a blind loop (insert the hook into the first jumper, grab the working thread and pull it through the loop on the hook). from further jumpers we pull out a loop and the last one from under the arch

We close the row in pairs.

To finish the first lower petal, we knit a blind loop into each purl jumper, and one under the arch

We make one blind loop in the next arch and begin to knit the second lower petal in the same way as the first. After you tie all three arches, it will look like this

To move to the upper petals, make 1 in. p insert the hook into half the loop of the small circle and knit a blind loop

On a small circle you need to tie 3 arches from 4 in. p (2 arches for petals and 1 for the core)

8. Dial 5 v. p and knit the first connection. upper petal column

First upper petal:

Two petals

We tie the upper petals with single crochets (I laid thin wire along the contour to better hold their shape). The lower petals were tied with stbn (without wire). It turned out like this

Sew on beads, maybe small beads, and admire

Starching caps

1. Wash the cap in warm water (30-40 degrees). I use bleach laundry detergent for white hats and colored laundry detergent for colored ones.

2. Prepare the starch. To do this, pour 2 tablespoons of starch into a bowl and dilute it with 1/2 cup of cold water (to avoid the formation of lumps). Then pour boiling water, about 1 - 1.5 liters, stirring constantly. The mixture should be thick and transparent. Leave to cool.

4. To dry the hats, I use regular inflatable balloons, after inflating them to the desired size.

5. During the drying process, I periodically give the brim the desired shape, and iron the brim of the openwork caps through a layer of fabric.

MORE HATS AND FLOWERS WITH THEM WITH DIAGRAMS

click on the picture to enlarge